Skip to content

pispi

pispi transfers byte values (0–255) over a Raspberry Pi SPI interface and outputs data received from the slave after each transfer. It selects /dev/spidev0.0 (CE0) or /dev/spidev0.1 (CE1) with device argument 0 or 1; to read only, send dummy data.

AI Generated

This content was generated with the assistance of AI. If you notice any errors, please report them or submit a fix using Submit. Check the prompt used here.

  • Download via Deken.

    Open Pd and go to ToolsFind Externals. Search for pispi and install it. Then create an object with declare -lib pispi -path pispi. Finally, use pispi or any other object from pispi.

  • Available for .

Similar

    Comments

    Contributors