lfo.+pulse~lfo.+pulse~ generates a unit-amplitude, nonnegative low-frequency pulse train in the 0–1 range.
fx.tremolo~fx.tremolo~ applies the tremolo effect from the Guitarix project to an input signal.
LFO_tabosc2~LFO_tabosc2~ is a low-frequency wavetable oscillator described as a two-point interpolation version of tabosc4~, with frequency specified in hertz.
lfnoise The lfnoise object generates low-frequency pseudo-random noise at a control rate, with an output range from 0 to 127.
tri~tri~ is a triangular wave oscillator that generates audio signals.
lfo.pulse~lfo.pulse~ generates a full-range, unit-amplitude low-frequency pulse train in the range −1 to +1.
seq.phasorseq.phasor is a control-rate sawtooth generator that outputs phase values in the range 0–1 and sends a bang after each full cycle.
lfo The lfo object is a control-rate Low Frequency Oscillator that generates common waveforms such as sine, triangle, sawtooth, variable sawtooth, and square.
satk.synth.LFOscil~satk.synth.LFOscil~ is a single oscillator module designed to generate very low-frequency waveforms, with GUI settings reaching 0.127 Hz.
LFO_noise~LFO_noise~ generates two-point-interpolated, time-stretched white noise with an output range between -0.5 and +0.5, suitable as a low-frequency noise source.
lfo.+square~lfo.+square~ generates a positive low-frequency square-wave signal in the [0, 1] range for use as a control or modulation source.
lfo.mosc~lfo.mosc~ is a multi-waveform low-frequency oscillator that outputs a signal and supports sine, saw, triangle, square, pulse, and related positive waveforms.
pp.shiftlfo~pp.shiftlfo~ is an LFO for generating irregular rhythmic patterns, with a signal output ranging from -1 to 1.
ceammc.lfoceammc.lfo is a collection of low-frequency oscillators offering pulse, saw, square, triangle, impulse-train, and multi-oscillator waveforms.
basic-lfobasic-lfo is a low-frequency oscillator with selectable sine, triangle, or saw waveforms and adjustable frequency and depth.
oscnoise~oscnoise~ is an oscillator that generates a waveform from a white noise table, which can be updated by a bang.
sine~sine~ is a versatile sinusoidal oscillator that supports negative frequencies, phase synchronization, and phase modulation.
lfo.m~ The lfo.m~ object is a versatile Low Frequency Oscillator module.
pwmpwm performs pulse-width modulation at message rate, providing a control-rate PWM signal from two float inlets to one float outlet.
lfo.tri~lfo.tri~ generates a zero-mean, unit-amplitude low-frequency triangle wave with an output range of 1 to -1.
vib~vib~ creates a vibrato modulation signal intended to be multiplied by a pitch signal, as shown with *~ 440.
train~ The train~ object generates a pulse signal that alternates between 1 and 0, with configurable period, pulse width, and onset phase offset.
tdh.synth.LFOscil.ui~tdh.synth.LFOscil.ui~ is a GUI-controlled oscillator for generating waveforms at very low frequencies, down to 0.127 Hz through its controls, for uses such as vibrato and tremolo.
pp.lfnoise~pp.lfnoise~ is a low-frequency noise generator that outputs a random signal in the range −1 to 1.
lfo.impulse~lfo.impulse~ generates a unit-amplitude, low-frequency impulse train as a signal.
lfo.+tri~lfo.+tri~ generates a positive, unit-amplitude low-frequency triangle wave in the [0, 1) range.
lfo.square~lfo.square~ generates a zero-mean, unit-amplitude low-frequency square-wave signal for modulation.
lfo.saw~lfo.saw~ generates a full-range, unit-amplitude low-frequency sawtooth signal in the range [-1, +1].
fd_loopfd_loop outputs a looping line from 0 to 1 over a specified time in milliseconds, intended as a simple timed loop generator.
fd_vibratofd_vibrato adds a vibrato-like effect to an input signal and outputs the processed signal.
phasor The phasor object generates a control-rate ramp signal, similar to phasor~ but for control signals rather than audio.
lfo.+saw~lfo.+saw~ generates a positive unit-amplitude low-frequency sawtooth signal in the [0, 1) range, suitable for modulation.